Laboratory Heating And Cooling Instrument

Slide Dryer

Maximum number of slices: 40 Temperature setting range: 0-70„ Timing range: 1-240min Operating temperature/humidity: 10-35„ ‰80% Weight: 8.5KG

Tissue Slide Oven Slide Dryer Slide Warmer

LED touching screen, intuitive control panel, User-friendly Operator. Fully programmable ON/OFF control allows automatic system start and stop anytime. Computer temperature control, quick heating, temperature control precision is ± 1%. Automatic memory functions: after start up, all preset temperature dates are automatically stored in the system. Buzzer alarm, set time, buzzer alarm when time is up. Two temperature control protection: computer temperature control and physical control protection system to avoid high temperature damage to tissue.

Tissue Slide Dryer

LED touching screen, intuitive control panel, user-friendly operator. Fully programmable ON/OF control allows automatic system start and stop anytime. Computer temperature control, quick heating, temperature control precision is ± 1%. Automatic memory functions: after start up, all preset temperature dates are automatically stored in the system. Buzzer alarm, set time, buzzer alarm when time is up. Three temperature control protection: computer temperature control and physical control protection system to avoid high temperature damage to tissue.

Combination Tissue Flotation Bath and Slide Dryer

The baking sheet part is colored with special technology, which has the advantages of wear resistance and no paint peeling. Multi-layer bevel design can process 60 tissue slices at the same time 6 sets of standard staining racks can be placed in the drying section, which can process 180 tissue sections at the same time This device uses a medical-grade high-definition color touch screen, all information is clear at a glance and easy to operate Precise temperature control by computer, fast and stable temperature rise It takes up to 10 minutes to reach 75 degrees The oven dryer and the slide dryer can be set to be heated separately Timing switch function Set time can be accurate to minutes Unique timing reminder function, set any duration, and beep after the time is up We also provide customers with a glass cover that can increase the heating efficiency

Automatic Tissue Dehydrator

Supply voltage and frequency: 110-120VAC, 60Hz or 220-240VAC, 50Hz Power consumption: 1200VA Operating temperature range: +10 „ to 40 „ Capacity: Up to 300 cassettes Temperature (paraffin): 50 „ 65 „ Temperature (dehydration reagent): Ambient temperature to 65 „ Temperature (rinse reagent): 60 „ for alcohol; 65 „ for xylene Number of small paraffin cylinders: 3 Number of large paraffin cylinders: 1 Capacity of small paraffin cylinders: 4.2L Capacity of large paraffin cylinders: 5.6L Reagent bottle: 10 Condensate bottle: 1 Rinse bottle: 3 Reagent bottle capacity: Scale Level 1: 3L Scale Level 2: 4.3L Scale Max: 4.8L Weight unpacked: Approx., 180KG Weight packed: Approx., 249KG

Touch Screen Tissue Flotation Water Bath

High-definition color touching screen, all information at a glance, easy to operate; Precise temperature control by computer, rapid and stable heating, small error; Timing switch function and settings; With memory function: set temperature is automatically retained after operation. Unique timing reminder function, can set any time, buzzer alarm when the time is up; High-temperature-resistant and large-capacity glass tray, with LED lighting at the bottom, safe and energy-saving, also easy to observation of specimen Computer and physical dual temperature control protection system to avoid excessive temperature and damage specimen

Edutek Digital Tissue Processor

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Automatic Edutek Tissue Processor

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Edutek Automatic Tissue Processor

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Automatic Tissue Processor 1 Liter

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Fully Automatic Tissue Processor

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Tissue Processing Unit Automatic

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Automatic Edutek Vacuum Tissue Processor

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Automatic Vacuum Tissue Processor

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Vacuum Automatic Tissue Processor

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Co2 Incubator Carbon Dioxide Incubator

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Automatic Tissue Processor Digital

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Automatic Tissue Processor Unit

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Automatic Co2 Incubator

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Edutek Automatic Co2 Incubator

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Laboratory Co2 Incubator

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Histology Vacuum Tissue Processor

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Co2 Incubator Shaker

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Edutek Tissue Processing Unit

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Tissue Processing Unit

Is a compact and versatile equipment for staining process atomization from stage one of fixation of tissue and dehydration process to paraffin wax saturation. Glass door with locking arrangement provides easy viewing and safety from tempering. Continuous agitation is provided by rotating S.S. Tissue basket to make process more effective. A superior thermostat maintains desired temperature of wax bath. Accessories: 1 - S.S. Basket rotor Tissue basket 24 - S.S. Tissue capsules 10 - 1 litre glass beakers 11 - beaker covers 2 - S.S. Wax baths each fitted with thermostat, 5-24 hrs. Calibrated timing discs One-notch plier for programming time discs It works suitably on 220V ac 50Hz single phase

Co2 Incubator

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Co2 Incubator 6 Cubic Feet

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Edutek Laboratory Co2 Incubator

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Digital CO2 Incubator

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Co2 Incubator Laboratory Equipment

Automatic co2 incubator with microprocessor control volume 200 liters. Interior construction: type 304. Mirror finish. Stainless steel. Exterior: 18 gauge cold rolled steel. Outer door gasket: four sided. Moulded. Magnetic vinyl. Inner door gasket: removable feather edged, silicone. Temperature range: 5 deg. C to above ambient to 55 deg. C. CO2 range: 0-20 deg. C. Tracking alarm for CO2 and temp.: user programmable high/low. Shelves: Dimension 470 x 470 mm Construction: stainless steel perforate electro polished. Optional: Air compressor. Carbon Dioxide cylinder with rubber pipes.

Medical Refrigerator

Medical Refrigerator ETB - 60 These Medical Refrigerator are designed to meet all modern requirements for conserving whole blood and other specific products used in medicine such as vaccines, reagents, cultures, processing and storing of blood. Standard double walled construction, inner chamber made of stainless steel sheet, outer made of thick mild steel sheet powder coated paint and gap filled with glass wool/PUF for temp. Insulation. complete with face lifting door having locking arrangement. Also having a transparent plexiglass door. Internal cabinet lighting is provided by lamp which is illuminated whenever door is open. Temperature is maintained by a digital temp. Controllercum- indicator within 4C “ 6C and trigger audio-visual alarm in case of temp. Fluctuations. A door operation alarm is also provided along with power failure alarm as a safety device. Drawers have been provided to hold blood bottles or bags. A sealed compressor unit and cooling coil running throughout the chamber for thermal uniformity. It works on 220V AC 50Hz single phase. Whole unit is fitted with castor wheels for ease of mobility. Material - Inner SS and Outer MS Capacity : 85 ltr. “ 50 blood bags 165 ltr. “ 110 blood bags 200 ltr. “ 160 blood bags 280 ltr. “ 240 blood bags 400 ltr. “ 300 blood bags Optionals : Digital temp. indicator-cum-controller with computer data logger. Weekly temperature recorder Automatic voltage stabilizer 3 KVA

Hot Air Oven ED-57156AE

HOT AIR OVEN ED-57156AE Drying large quantities of aggregate samples; Also in drying large quantities of soil samples. Interior body is made from stainless steel by argonarc- welding technique. Digital sterilizing oven, Capacity: 74 liters, Exterior body is made of high-quality steel sheet with a novel appearance. Temperature control protection. Temperature range 5C Above ambient up to +300C, Digital timer adjustable from 1 minute to 99 days, 23 hours, Multiple Over temperature Protection With audible and visual alarm, Microprocessor controlled Power: 220 v HOT AIR OVEN (ED-57156AF) : Up right rectangular drying oven for drying plant/speed Glass wares, Electronic microprocessor- PID controller With integral digital timer. Digital display of set temperature, actual temperature and program time Adjustable over heat controller, ambient to 300c temperature control range, single door fitted with lock Up right rectangular drying oven for drying plant/speed Pilot light and thermometer , heavy duty body of sheet Steel with light colored paint , aluminum or sheet stee Inner chamber ,stainless steel base , about 6 removable Perforated shelves. fire proof construction. Capacity 125 liters Power supply: 220V 50/60Hz Pilot lamp Qty 2 Heating element 1

STABILITY CHAMBER : ETK-SC24

STABILITY CHAMBER : ETK-SC24 Stability Chamber Microprocessor Control are microprocessor controlled chambers with soft touch keyboard for fast and accurate setting of various parameters. Just set the temperature, humidity & time and the system runs automatically. All the parameters are digitally displayed and reproducible. Material - Inner SS and Outer MS Special Features: Temperature accurately controlled through microprocessor based controller. Automatic On / Off of the compressor according to need of process to reach & maintain the set values. Chamber illumination with fluorescent or ultra violet lights. Audio Visual alarm warning of temp. variation. User™s friendly Microprocessor Design/Operation. Additional Features: Humidity accurately controlled through microprocessor controller in addition to temperature. Direct display of humidity in % RHQ. Audio visual alarm warning of low water levels & door opening. Humidity : 40% to 95% ± 3%. Technical Data: Capacity Temperature Range 170 lit. / 6 cft. 5C to 60C ± 1.0C 285 lit. / 10 cft. 5C to 60C ± 1.0C 340 lit. /12 cft. 5C to 60C ± 1.0C 170 lit. / 6 cft. Ambient to 70C ± 1.0C 285 lit. / 10 cft. Ambient to 70C ± 1.0C 340 lit./ 12 cft. Ambient to 70C ± 1.0C Optional: Chart Recorder weekly. RS-232C interface available for humidity control through personal computer. Digital temp. indicator-cum-controller with computer data logger. Cyclic timer for regulating illumination conditions. Automatic Voltage Stabilizer 3KVA.

Bacteriological Incubator ETS - 56

BACTERIOLOGICAL INCUBATOR : ETS - 56 Bacteriological Incubator (Memmert type) has a standard double walled construction. Inner chamber made of stainless steel sheet and outer made of mild steel sheet finished in powder coated color combinations. Gap filled with glass wool for temp. Insulation. Double walled door with double glass window for observation in the chamber. Temperature range 5C above ambient to 80C ±2C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC 50Hz single phase. Material - Inner SS and Outer MS. Common Chamber sizes in mm. No. of trays 355 x 355 x 355 2 455 x 455 x 455 2 455 x 605 x 455 3 605 x 605 x 605 3 910 x 605 x 455 3 910 x 605 x 605 3 Optional : Air circulating fan. Timer 24 hours. Digital Temp. Indicator-cum-Controller. Digital Temp. Indicator-cum-Controller with computer data logger.

Ultralow Deep Freezer Horizontal ET-11943

Ultralow Deep Freezer ET-11943 -40C chest freezers provide versatile and reliable sample storage. Delivers all the sample protection features of our Forma 900 and Forma 700 upright series and available in four convenient sizes as well as a full range of racking solutions. Microprocessor control: Centralized information center, including microprocessor control and monitoring system ensures that all controls and displays are easy to reach and readknee level on the 3 cu. ft. models State-of-the-art, refrigeration system: Iimproves temperature control and increases reserve BTUH capacity, resulting in a more stable temperature sample 5 in. (127mm) foamed-in-place, polyurethane insulation: Reduces power consumption, maintains temperature setpoint and combined with triple-point door gasket, provides longer holding time in the event of a door opening Rugged, heavy gauge, cold-rolled steel cabinets: with a powder coat paint finish provides a uniform exterior that resists chipping and rust 1 in. (25mm) access ports: allow for the use of inexpedient probes or instrumentation Stainless steel interior Polystyrene interior sub-lids: Reduce cold air loss and improve temperature recovery after door openings Easy-to-remove, washable filter: Provides protection from dust on the condenser, causing reduced refrigeration performance and increased risk to samples Simplified installation: with our new easy-roll 2 inch locking casters Material - Inner SS and Outer MS. Features: Temperature range: -20C, -30C, -40C, -70C, -80C . Available in horizontal or vertical designs. It works on 220V AC 50Hz single phase. Capacity : 55 ltr / 2 cu ft. 120 ltr / 4.5 cu ft. 170 ltr / 6 cu ft. 280 ltr / 10 cu ft. 425 ltr / 15 cu ft. 650 ltr / 23.5 cu ft. Optional : Digital temp. indicator-cum-controller with computer data logger.

Deep Freezer ETHR-99A

Deep Freezer ETHR-99A Deep Freezer Specially designed for quick freezing and storing of biological medical specimens, clinical samples, blood components, serum, vaccines etc, at low temperature. Features: Temperature range: -20C, -30C, -40C, -70C, -80C . Available in horizontal or vertical designs. It works on 220V AC 50Hz single phase. Capacity : 55 ltr / 2 cu ft. 120 ltr / 4.5 cu ft. 170 ltr / 6 cu ft. 280 ltr / 10 cu ft. 425 ltr / 15 cu ft. 650 ltr / 23.5 cu ft. Optional : Digital temp. indicator-cum-controller with computer data logger.

B.O.D. INCUBATOR ETS - 56A

B.O.D. INCUBATOR ETS - 56A B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.) : Double walled construction. Inner chamber made of anodized aluminum sheet/stainless steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors. Temperature is controlled by a micro processor digital temperature controller cum indicator from 5C to 50C ± 1C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working. Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, temp. controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase. Material - Inner SS and Outer MS Note: Use of a suitable Voltage Stabilizer is essential. Size of chamber in mm (WxHxD) Capacity (cu ft.) 455 x 410 x 610 4.00 500 x 800 x 415 6.10 565 x 865 x 550 10.00 650 x 900 x 550 12.00 700 x 900 x 650 15.00 Optional Arrangements Available : Digital temp. indicator-cum-controller with computer data logger. Therm o-hydro-graph. Timer : 0-24 hrs. Day/night cycle. CO2 / Air mixture inlet nozzle. Audio-visual alarm. Automatic Voltage Stabilizer 3 KVA. Humidity System (Steam) for BOD Incubator BOD Incubator can be provided with humidity arrangement. Humidity is created by condensation of steam generated by heaters dipped in water. Humidity is controlled by imported humidity from ambient to 95% ± 3% RH.

Ultralow Deep Freezer ET-11942

Ultralow Deep Freezer ET-11942 These Quick Freezers are designed for quick freezing and storing of Blood Components. Serum, Vaccines. Biological and Medical Specimens. Clinical Samples etc., at low temperatures. These freezers are with specially engineered Superior Insulation and specially designed refrigeration system. Constructed of double walls, the exterior is made of sheet steel powder coated colour combination while the interior of stainless steel having PUF insulation to minimise heat loss. Capillary controlled balanced hermatically sealed referigeration is most economical, trouble free and exceptionally quiet. Temperature controlled by Digital Electronic Indicator-cum-Controller. Counter balanced door provided for easy access to chamber and inside Acrylic door to avoid temperature loss. Temperature range 20C, 30C, 70C . Available in Horizontal or designs. To work on 220 V AC 50 Hz single phase. Capacity : 55 ltr / 2 cu ft, 120 ltr / 4.5 cu ft, 170 ltr / 6 cu ft 280 ltr / 10 cu ft 425 ltr / 15 cu ft 650 ltr / 23.5 cu ft DEEP FREEZER (ET-11942D) Digital display of temperature and temperature controller Temperature failure alarm Easy clean internal rounded corners Fitted with castors Capacity of 215 liters Operation temperature of -20C to -45C Power supply of 230V, 50/60Hz Dimension 980 x 690 x 945mm (wxdxh) Accessories 1 Ice remover 2 Starting capacity x2 3 Running capacity x2 4 Starting relay 5 Temperature sensor Overload relay

Laminar Air Flow (LAF)-Horizontal

Laminar Air Flow Cabinets- Horizontal ETC-73A Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass. Prefilters:- DOP tested as per Standard BS: 2831 with efficiency 90% down to 5microns. Made of Washable synthetic material. Hepa Filters:- Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per US Standard 209B. Efficiency 99.97% down to0.3 microns. Blower Units:- Assembly of AU or equivalent motor workable on 220V AC 50Hzsingle phase, dynamically balanced blowers making the unit least vibrant with minimum noise level. Features:- Lighting : Fluorescent tube lights Sterilization : Germicidal Ultra Violet (UV) tube Manometer : Static pressure thick Acrylic block type K-System:- The K-System encompasses the specialist requirement of ocyte, and embryo handling during procedures in both animal and human reproduction. The K-system is often built into a Laminar Flow Cabinet. The utensils are warmed by the heating of part of the table plate of the cabinet. The transmitted light source and the regulation transformer for the stereo microscope are located under the stainless steel table plate, with a window for transmitted light built into the table plate. Material - Inner SS and Outer SS Inner SS and Outer MS Available in following sizes :- Work area 4x2x2

Sampling & Dispensing Booth ETK - SDB24I

Sampling Dispensing Booths ETK - SDB24I Features: Wooden/m. S powder coated / stainless steel body (304) HEPA filter (0. 3 micron) Fine filter (10-5 micron) Pre-filter (10 micron) Motor blower assembly U. V. Light Fluorescent lamp Operating switch Static pressure manometer Stainless steel standing base High quality hepa filter provides protection for the product (filtration efficiency of more than 99. 97% at 0. 3 micron Ultra-quiet noise level of not more than 65 dba Durable and easy to clean stainless steel body Work area properly illuminated by diffused glare free fluorescent light PVC flexible curtains on all the three sides Optional accessories: Particle dust count-validation at site Timer for U. V. Light Speed regulator Caster wheels Magnahelic manometer Description - Fully SS 304 Available in following sizes :- Work area 5x3x6.5 ft

Laminar Air Flow (LAF) - Horizontal

Laminar Air Flow Cabinets- Horizontal ETC-73A Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass. Material - Inner SS and Outer SS, Inner SS and Outer MS Available in following sizes :- Work area 3x2x2

Pass Box

Stainless Steel Body Pass Box ETK - PB24 Pass box (stainless steel body) the pass box is an equipment normally installed on the wall between the clean room and any other room. It is used for transfer of material from and into the clean room, without contaminating the air of clean room and without having to open room door. This is achieved with the help of interlocking type doors of pass box. Description - Static, Dynamic Principal of working: This equipment is installed on the wall between the clean room and the other room. The pass box has two doors at its extreme ends. One door opens in the clean room and other door open in the other room. These doors are electrically interlocked type so that any other door can be operated at a time. This avoids direct flow of air from the clean room to the other room or vice versa. This also avoid the need to open the clean room door frequently for transferring of material from & into the clean room. Thus, it helps in achieving the aim of material transfer without disturbing the cleanliness level of the clean room. Construction: It is made of commercial board and all its external & internal surfaces are dully laminated. L. M. S. Or s. S. Sheet body also can be supplied optionally. Each hinged door has wide glass viewing window, through which material kept in the pass box can be seen. These doors are electrically interlocked type so any one door can be opened at a time. U. V. & fluorescent light and hepa filter can be provided optionally. Available size : 2X2X2 Other sizes on request.

GARMENT STORAGE CABINET

GARMENT STORAGE CABINET : ETK - GSC24I Garment Storage Cabinet is a self standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Bio Safety Cabinet Class II A2

Bio Safe Biological Safety Cabinet ETC-74A2 These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere. Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required. These cabinets are self contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands. Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air. Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply. Material - Inner SS and Outer SS, Inner SS and Outer MS Available in following sizes :- Work area 4x2x2

Laminar Air Flow (LAF) - Vertical

Laminar Air Flow Cabinets ETC-73 works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass. Material - Inner SS and Outer SS, Inner SS and Outer MS Available in following sizes :- Work area 4X2X2

Laminar Air Flow (LAF) - Vertical.

Laminar Air Flow Cabinets ETC-73 works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass. Material - Inner SS and Outer MS, Inner SS and MS. Available in following sizes :- Work area 3x2x2

Bio safety cabinet class II A2

Bio Safe Biological Safety Cabinet ETC-74A2 These Class I safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere. Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required. These cabinets are self contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands. Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air. Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply. Material - Inner SS and outer SS, Inner SS and outer MS Available in following sizes :- Work area 3x2x2

RECTANGULAR HORIZONTAL AUTOCLAVES

Water Bath Shaking

Environmental Shaker Incubator

B.O.D. Incubator

Orbital Shaking Incubator

Autoclave Horizontal

Carbon Dioxide Incubator

Rectangular Water Bath

Water Bath Incubator Shaker

Vertical Autoclaves

Hybridization Incubator

Incubator

Serological Water Bath

Refrigerated Water Bath

Circulated Water Bath

High Temperature Oil Bath

Temperature and Precision Control Water Bath

Vacuum Oven

Humidity Oven

CLIMATIC CHAMBERS

Universal Oven Memmert Type