A transparent, inclinable flow channel through which water can be recirculated by a pump over a mobile bed to demonstrate the whole range of bedforms from incipient particle movement to bed wash-out
The channel slope can be adjusted within the range 0-10%
The working section of the channel is 1.55m long, 78mm wide and 110mm deep
A model undershot weir and bridge pier are included for local erosion demonstrations
A water level gauge is supplied to calibrate the overshot weir
To study the hydrodynamic phenomena of the open surface streams in variable inclination channels
Reach an inclination maximum of 1.5 °
Support frame:
Made of painted steel embossed
Consisting of:
A tubular base 60x40x3 mm on which is housed the tilting mechanism
A support plate for the channel plexiglass, suitably divided into two modules
Overall dimensions: 660x5400x1100h mm
Channel:
Made of plexiglass
Realized in two modules, one of three meters and one to two meters
Equipped with bushings for the insertion of the accessories at a constant distance of 500mm
Working section 100x300hmm for a 5m length
Sliding system of the accessories, made of aluminum and mounted on the top of the channel
Adjustment manual system of the slope composed of: Micro metric screw
Rotation pin AISI304 calibrated Ø20mm
Rotation guaranteed by two supports UCP204
Supply and collection tank :
Made of AISI304, sheet thickness 20/10
Overall dimensions: 750x1200x600h mm
Capacity: 400l
Electrically operated centrifugal pump:
Impeller, monobloc with direct coupling motor-pump and single shaft
Pump body with suction and discharge with the same diameter and on the same axis ("in-line").
Flow rate: 0-42 m3/h
Head: 6,3-1,5 m
Power: 0,75kW
Stilling pre-tank:
Made of stainless steel AISI304, sheet thickness 20/10
Equipped with a connection flange to the electric pump
Overall dimensions: 465x152x540h mm
Stilling tank:
Made of transparent plexiglas
Overall dimensions: 376x180x820h mm
Capacity: 26l
Equipped with a gate, made of plexiglass, manually
Adjustable for feeding water into the channel
Discharge gate:
Made of transparent plexiglas
Overall dimensions: 600x180x815h mm
With free discharge into the collection tank and feeding
With damper, made of plexiglass, reclining manually
Volumetric flow meter:
Voltmann type
At 8 numerical rolls, dry dial, rebuildable
EEC homologation Class B
Body made of iron
Shaft, rotation pins and mechanisms of demultiplication
Made of stainless steel
Maximum pressure and temperature of operation: 16 bar, at 30 ° C.
Flanges UNI 2223, PN 10, DN 80
Control board including:
Main switch
Safety devices
Pump commands
Electronic transducers kit, complete with feeding unit
and signal conditioning electronics including:
Electronic transducer for measuring the flow and the
level of the water in the channel, complete with
digital indicator and signal transmitter;
Electronic transducer for measuring the speed of the water in the channel, complete with digital indicator and signal transmitter.