Turbine Supply Unit Manufacturer,Turbine Supply Unit ,Supplier , Exporter, India

Product Description

TURBINE SUPPLY UNIT

Supply unit can be used to operate a Pelton or Francis turbine, whose characteristic operating behaviour can then be investigated.
The separate turbines from are placed on the working surface of the supply unit and screwed in place. The turbine is connected to the supply unit via a hose. After the water has flowed through the turbine, it flows back into the tank. Thanks to its closed water circuit, the trainer is independent from the mains water supply and can be used in mobile applications. The flow rate and/or the pressure present at the turbine can be adjusted by a flow control valve.
The supply unit is equipped with sensors for pressure and flow rate. The measured values are displayed digitally. The mechanical turbine output is measured via the Universal Drive and Brake Unit, which is also required. The brake unit is used to adjust constant speeds or torques, allowing experiments to be carried out in different operating modes.
The measured values are read from digital displays on the supply unit and can be transmitted simultaneously via USB directly to a PC where they can be analysed using the software included.
The well-structured instructional material sets out the fundamentals and provides a step-bystep guide through the experiments.
The unit shall perform the following experiments and investigations:
Learning Objectives / Experiments in conjunction with Universal Drive and Brake Unit and a Pelton or Francis turbine - determination of the mechanical output of the turbines - determination of the hydraulic output of the turbines - determine the efficiencies of the turbines - plot characteristic curves - influence of the guide vane position on the characteristic curve when using the Francis turbine - influence of the nozzle cross-section on the characteristic curve when using the Pelton turbine

Specification:

Supply unit for turbines
Closed water circuit contains multistage centrifugal pump, tank, inductive flowmeter and flow control valve
Connection to the turbines via flexible hose with quick-release coupling
Constant torques and speeds can be adjusted via Universal Drive and Brake Unit
Digital display for flow rate, pressure and temperature
Braking torque and speed measured by Universal Drive and Brake Unit
Software for data acquisition via USB under Windows Vista or Windows 7

Technical Data:

Centrifugal pump, 3 stages
Power consumption: 3kW
Max. flow rate: 29m3/h
Max. head: 45m
Speed: 2900min-1 Tank: 96L

Measuring ranges:

Pressure (turbine inlet): -1...9bar
Pressure (Francis turbine outlet): 0...1,6bar
Temperature: 0...100°C - flow rate: 0...600L/min

Dimensions and Weight:

LxWxH: 1365 x 835 x 1310mm
Weight empty: approx. 135kg

Thank You for your valuable time. We have received your details and will get back to you shortly.

Turbine Supply Unit

Product Details:

Product Description

Other Products in 'Fluid Mechanics Lab Equipment' category