Thermodynamics Of The Refrigeration Circuit
Product Details:
X
Product Description
THERMODYNAMICS OF THE REFRIGERATION CIRCUIT
In this trainer, great care was taken to make the thermodynamic processes in the refrigeration system as transparent as possible. The capacities of compressor, evaporator and condenser can be measured. Pressure and temperature measuring points are located at all the relevant locations to also allow for the pressure and heat losses in a refrigeration system to be investigated in detail.
The refrigeration circuit of contains an open compressor with variable speed, a water-cooled condenser, a thermostatic expansion valve and an evaporator heated by a hot water circuit. The compressor is driven via a pendulum bearing motor with frequency converter for speed adjustment. A force transducer permits the measuring of the drive torque. Using the speed the mechanical drive power of the compressor can thus be determined. The electrical heating power of the hot water circuit can be freely adjusted and is displayed. The condenser capacity is measured via the cooling water flow. The measured values can be read on digital displays. At the same time, the measured values can also be transmitted directly to a PC via USB. The data acquisition software is included. The software allows for the process to be represented in the log p-h diagram and displays the key characteristic variables of the process, e.g. compressor pressure ratio and coefficient of performance.
The unit shall perform the following experiments and investigations:
Learning Objectives / Experiments
- Cyclic process in the log p-h diagram comparison of the real cyclic process and the ideal cyclic process
- Energy balances at the evaporator and condenser
- Calculation of the motor power via speed and torque
- Determination of losses
- Calculation of the coefficient of performance
- Operating behaviour under load
- Non-steady-state operating behaviour
Specification
- Thermodynamic investigation of a refrigeration circuit
- Refrigeration circuit with open compressor, water-cooled condenser, thermostatic expansion valve and indirectly heated evaporator
- Compressor drive with speed-controlled motor via V-belt
- Motor on pendulum bearing for torque measurement
- Tube evaporator with hot water circuit as cooling load
- Water-cooled coaxial coil heat exchanger as condenser
- Displays for temperature, pressure, flow rate, speed, torque and power at the equipment
- Software for data acquisition via USB under Windows Vista or Windows 7
- Refrigerant R134a, CFC-free
Technical Data
- Open compressor
- Refrigeration capacity: approx. 550W (at a speed of 500min-1 and -10/20°C)
- Motor: 550W, 1400min-1
- Heater: 1x 1000W
- Condenser
- Capacity: 1300W
Measuring ranges
- Temperature: 9x -30...100°C, 1x 0...100°C
- Pressure: 1x -1...9bar, 1x -1...24bar, 2x -1...15bar
- Torque (compressor): 0...10Nm
- Speed (compressor): 0...2500min-1
- Power consumption (compressor): 0...1125W
- Power (heater): 0...1125W
- Flow rate (water): 5...70g/s
- Flow rate (refrigerant): 0...0,5L/min
Dimensions and Weight
- LxWxH: 1520x790x1760mm
- Weight: approx. 120kg
Enter Buying Requirement Details
Other Products in 'Fluid Mechanics Lab Equipment' category
"We deal all over World but our main domestic market is South India"
- EDUTEK INSTRUMENTATION
None - Factory: 70, Edutek House, Main Road Vikaspuri, Industrial Area, Ambala Cantt - 133006, Haryana, India
- Phone :91-171-2699855
- Email Id : edutekgroup@gmail.com
- Mr Aditya Kumar (Director-International Sales)
- Mobile :+919996644855, +918930444855
- edutekgroup@gmail.com
Send Inquiry
 |
EDUTEK INSTRUMENTATION
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |