PROCESS CONTROL ENGINEERING EXPERIMENTAL PLANT
As shown in figure this experiment module is made in three parts jointed together. Mounted on moveable frames.
Complete industrial-scale process engineering experimental plant. Control of level, flow rate, pressure. Temperature and cascade control.
The plant enables familiarization with a practical scenario of this nature. The trainer includes a water circuit with a pump, collecting tank and graduated tank. In this circuit, the flow rate and level arc controlled by way of pneumatic control valves.
The level control also be executed under counter pressure or as cascade control. An additional tank connected to facilitate learning with a second-order level controlled system.
Compressed air is used in the control of pressure. The level of liquid in the tank varied to give time-varying response of the controlled system.
The temperature control takes place in the collecting tank. Warm water flows into the tank. Cold water is mixed in using a control valve, thereby regulating the temperature in the tank.
The separate control station includes the controllers and line recorders for monitoring and control of the control processes. The controllers have an interface.
This enables the trainer to be controlled by using process control software.
PUMP
COMPRESSOR
Note: image shown above is for illustration purpose only; Actual image may vary due to specification, Design, Technology and R&D.
EDUTEK INSTRUMENTATION
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |