MELTING CRUCIBLE FURNACE

Request to Call Back Send Inquiry

Product Description

MELTING CRUCIBLE FURNACE

Specifically designed for use in industry and education. Capable of melting a range of metals including aluminium,

brass, bronze, gold and silver. All valves and pipe work, including the whisper quiet blower fan, are included within the

self-contained cabinet. Safe operation is by panel mounted controls. Ignition is automatic and there is automatic flame

control with no user interaction required. On ignition, the crucible furnace is automatically put on low heat for about 5

minutes to preheat the chamber and crucible pot before ramping up to full heat input. This helps to reduce the risk of

thermal shock. With a motorised safety tilt system that is push-button operated from rest position to pouring position

and back. The unit can be held in one position by continuously pressing and releasing the tilt button. It can re-establish

firing conditions, maintain correct gas/air ratios and shut off safely if the mains electrical power or gas is cut off.

Efficient insulation and refractory materials give fast heating

KEY FEATURES

Whisper quiet blower fan
Super efficient insulation
Push button, no volt release starter
Requires manual restart after
Power failure
Electronic flame failure protection
With automatic ignition
Capacity of 4.2 litres
Designed to work with natural gas,
Propane or butane.
Melts 11 kg of Copper or Zinc in 35 minutes and 4 kg of Aluminium in 25 minutes
Maximum temperature 1200°C
Push-button operated motorised safety tilt system
Capacity: 4.2 litres to brim
Typical Melting Times from Cold : Aluminium 4kgs 25 minutes Copper/Zinc 11kgs 35 minutes
DIMENSION : 1050 mm×500 mm× 883 mm
Max. Temp. 1200° C Electrics 120 Watts - 220 - 240 volt single phase