MASS OSCILLATION AND WATER HAMMER STUDY UNIT - WATER SUPPLAY FROM THE NET The unit suitable to study:
The mass oscillation
The water hammer in a pipe
Water supplay from the net
Composed of:
Pipe surge demonstrations are conducted using the first test pipe which incorporates a transparent surge shaft with scale and lever-operated valve at the discharge end. An additional valve downstream allows the flow through the test pipe to be varied before closing the lever operated valve. An electronic pressure sensor located at the base of the surge shaft allows the low-speed transients in water level to be measured.
Water hammer demonstrations are conducted using the second test pipe, which incorporates a fast acting valve at the discharge end. An additional valve downstream allows the flow through the test pipe to be varied before closing the fast acting valve. The unique fast acting valve, allows water hammer to be generated in a relatively short length of straight pipe because of the extremely short closure time achieved using a trigger actuator.
Double frame on which all the testing devices are installed a frame for supporting the water supply tank made of steel painted in relief, square cross section 30x30x2 mm
Overall dimensions 920x400x1140h mm
A frame to support the piping system
Made of steel painted in relief, square cross section 30x30x2 mm