COMPUTERIZED WATER PUMPS ASSEMBLY TESTING BENCH WITH TRANSPARENT HEAD - BASIC GROUP The equipment comprises a water reservoir, and five pump positions (four active). Each pump position uses pipework and sensors optimised to the type of pumps it is intended for optimised for high flows at low heads, such as the rotodynamic pumps, whereas positions and are suitable for lower flows but higher pressures, as obtained from the positive displacement pumps. two position are mutually exclusive as they share the same motor drive. Switching between any of the four installed active pumps, (or series/parallel configuration) is simple, requiring only isolating valve changes and control panel selection. Changing over an installed pump for one of the other options is still straightforward, but requires plumbing changes (easy-release fastenings), topping up the tank with water (to replace any lost) and reprogramming some inverter settings. Additional pumps and options can be purchased at any time, and fitted by the user.
To study the typical parameters of different types of water pumps
Support frame:
Made of painted steel, square shape 25x25x2
Overall sizes mm. 2000x700x1350h with wheels
Equipped with a mechanical structure that ensures the coupling of the motor with the individual pumps
Storage reservoir made of stainless steel,
The following characteristics:
100L capacity
Shut off valve
Possibility of up/down movement for under/over head tests
Calibrated tank, made of stainless steel, with the following characteristics:
40L capacity
Overflow
Discharge valve
Graduated level
Feed pipe
Pressure gauge 0 - 10 bar piezometric type, with analog output to measure the discharge pressure
Pressure gauge -1 - 0.6 bar, piezometric type, with analog output for measuring the inlet pressure
Delivery pressure transducer, range 0,6-150l/min, with analog output